Position Default Function
S5* Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
S6* Off
Off = No function
On = Reset configuration
S7 Off Reserved
S8 Off Reserved
S9* Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
*You can access the redundant ROM by setting S1, S5, and S6 to On. Switch S9 must be set to On for GPU
expansion options.
Mezzanine connector definitions
Item Connector identification Supported card types Fabric Supported ICM bays
1 Mezzanine connector 1 (M1)* Type C and Type D 1 ICM 1 and 4
2 Mezzanine connector 2 (M2)** Type C and Type D 2 ICM 2 and 5
3 Mezzanine connector 3 (M3) Type C only 3 ICM 3 and 6
NOTE:
Hewlett Packard Enterprise recommends that you install P416ie-m on mezzanine 1.
* When an NVIDIA Tesla M6 GPU FIO Adapter for HPE Synergy 480 Gen10 compute module is installed in
mezzanine connector 1, mezzanine connector 2 is not available for additional mezzanine cards.
Mezzanine connector definitions 67
To Next Page
Loading...
