The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
7. Enter the product ID, and press Enter.
8. To confirm exiting System Utilities, press F10.
9. The compute module automatically reboots.
HPE Trusted Platform Module 2.0 Gen10 Option
The HPE Trusted Platform Module 2.0 Gen10 Option is not a customer-removable part.
CAUTION:
If the TPM is removed from the original compute module and powered up on a different compute
module, data stored in the TPM including keys will be erased.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact a Hewlett
Packard Enterprise authorized service provider for a replacement system board and TPM board.
Dual 8Gb microSD Enterprise Midline USB device
This compute module supports the installation of the Dual 8Gb microSD Enterprise Midline USB device on the
compute module internal USB connector.
This USB storage device contains a dual-microSD card module that supports up to two SD, SDHC, or SDXC
storage cards providing data redundancy through a mirrored RAID-1 configuration. This USB storage device
connects to an internal USB connector and is configured upon boot.
To locate the internal USB connector, see "System board components." For more information, see the Dual
8Gb microSD EM USB storage device documentation on the Hewlett Packard Enterprise website.
HPE Trusted Platform Module 2.0 Gen10 Option 53
To Next Page
Loading...
