4. Remove the access panel.
5. Remove the heatsink blank. Retain the heatsink blank for future use.
To replace the component, reverse the removal procedure.
Removing and replacing DIMM baffles
Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove one or more DIMM baffles.
6. If the Smart Storage Battery is installed, remove it from the DIMM baffle.
To replace the component, reverse the removal procedure.
Removing and replacing DIMM baffles 39
To Next Page
Loading...
