HPRT KP806

KP806 User Manual
Rev.1.0
9
2.2 Media Specification
2.2.1 Continuous Thermal Paper Specification
1) Paper Type:Specified Thermal Paper
2) Paper Width:
0
1
80


mm/
0
1
58


mm
3) Roll Paper Core 13mm(Internal Diameter) 18mm(Outer Diameter)
4) Paper Thickness:0.050 ~ 0.090mm
5) Recommending Paper
Paper Type
Manufacturer
FD210,PD150R,PD160R
OJI Paper CO.,
2.2.2 Paper Specification
Notes:
1)
Please use the recommended thermal paper or same quality paper, otherwise it will influence
the print quality and decrease the thermal printer head life;
2) Don’t stick the paper on the roll paper mandrel;
3) If the thermal paper is polluted by chemical or oil, the thermal paper heat sensibility decreases,
which will influence the print quality;
4) Don’t use finger nail or hard articles to touch the surface of thermal paper, otherwise it will
cause color fading;
5) When the environment temperature is higher than 70°C, the thermal paper color will fade, so
pay attention to the influence of temperature, humidity and sunlight.