KP806 User Manual
Rev.1.0
3 INSTALLATION AND USAGE
3.1 Installation Site and Direction of Printer
1) 1) KP806 have two ways to install: wall-hanging(optional:wall-hanging carrier) and horizontal
installation. It’s recommend that install the printer at horizontal line;
2) 2) The printer should install at a flat and steady place. It’s recommend that install the
printer at horizontal line.The angle of inclination should not exceed ± 10°(paper feed
direction) if tilt install printer, it does not allow to tilt by other direction;
3) 3) Keep printer far away from source of water;
4) 4) Avoid the printer on place where it is vibration and shock;
5) 5) Ensure printer ground connect is safe;
6) 6) When the printer is at operation and maintenance, it is recommended to retain the
enough space to ensure the printer can work in reliability and ease of operation.
3.2 Ethernet Waterproof Buckle Loading
1.Let Ethernet line get through lid of waterproof net.
2.Open silicone lid of waterproof net,set silicone lid into waterproof net.
To Next Page
Loading...
Need help?
General
