Why is the ribbon coming out of my HPRT MT800 Printer during printing?
If your HPRT Printer ribbon is taken out during printing, it might be because the ribbon was loose before you started. Roll the ribbon to a flat state using the rewind wheel to correct this.
Why won't my HPRT MT800 Printer automatically feed paper?
If your HPRT Printer isn't automatically absorbing paper, it could be that the cover isn't properly closed. Check that both sides of the cover are securely in place.
Essential warnings for safe printer operation and user protection.
Guidelines for operating, storing, and handling the printer safely.
Critical safety instructions for battery use, charging, and disposal.
Step-by-step guide to correctly load paper into the printer.
Guide to printing from a mobile device using the H-Print app.
Instructions for connecting and printing from a PC.
Interpreting LED colors and buzzer sounds for printer status.
Solutions for problems where the printer is not working or lights up.
Troubleshooting steps for common printing errors and paper jams.
Procedure for cleaning the printer's print head.
Detailed steps for installing the printer driver on Windows.
Guide to using the printer driver via Bluetooth connection.
To Next Page
General
