TP801/TP805/TP806 User Manual
www.hprt.com 24
8) Click “Finish”.
9) Click Click “Control Panel”￫”Hardware and Sound”￫”Devices and Printers”., right click
“Printer Properties” of printer HPRT TP806 and choice “Ports”￫“Configure Port…”,
finish the setting of related parameter, click “OK”.
4.9.3 Parameters checking and resetting illustration of the Ethernet and
Wi-Fi cards
Ethernet parameter checking:
Press the button on the communication card round hole when the printer is power on,
the printer will print the current Ethernet parameters.
Ethernet card parameter resetting:
Press the button on the communication card round hole then power on. After you
power on, the parameter on the communication card is renew to the original
situation.
To Next Page
Loading...
