TP80BE User Manual
4.2 Power Connection
1) Make sure the printer power is turned off .
2) Connect power adapter with printer.
3) Connect power adapter with power cord.
4) Plug the other side of power cord into the socket outlet.
Notes：
1) Please only use the power adapter are recommended by supplied or equivalent products;
2) When disconnecting the power adapter plug, handheld plug connector housing, to avoid
the pulling on the cable in force;
3) Avoid drag the power adapter cable, otherwise it will damage the cables, causing fire and
shock;
4) Avoid put power adapter around a heating device, otherwise the cable may melt, causing
fire and shock;
5) If you do not use the printer in a long time, disconnect the power supply of printer power
adapter.
To Next Page
Loading...
Need help?
General
