HPRT TP80BE

TP80BE User Manual
21
6.4 Problems Emerge During the Paper Cutting
Problem Description
Probable Reason
Resolution
Cutter jam, the
movable cutter
cannot back
Cutter abrasion,
insufficient cutting
Replace the cutter
Worm gear and worm
wheel abrasion
Replace the worm gear and worm wheel
Motor burnt
Replace the motor
Paper scraps
Clean the paper scraps on the transmission system
Insufficient cutting
Cutter edge abrasion,
paper too thick
Replace the cutter
Paper jam
Thermal printer head
over heat
Reduce the density of printing
Driving too fast
Reduce the printer speed to the limit of thermal
printer head
Wrong paper feeding
position
Put the paper parallel with the paper mount and
insert into the space between platen roller and the
thermal printer head.
Note: The density of setting, please refer to "Utility Tool Manual"