81
9、stopper elastic ring for shaft 10、middle spacer sleeve of fore L/R rocker arm 11、fore
bottom-right rocker arm 12、fore bottom velocity joint assembly
13、stopper elastic ring for shaft 14、middle spacer sleeve for security 15、
hexagon flange bolt
M10×40 16、hex locknut
17、elastic cushion 18、
hexagon flange bolt M10×65 19、hex locknut M10×1.25
20、fore L/R damper 21、
hexagon flange bolt M10×50 22、hex locknut M10×1.25
23、cover of fore bottom-left
rocker arm 24、cover of fore bottom-right rocker arm 25、hexagon
flange bolt
M6×12 26、holding plate nutM6
4.6.4 Disassembly, Maintenace and Assembly of
up-and-dowm
rocker arm 1、Disassembly and Maintenace
Collar Sheath,cotter pin and damper may easy to occor problem.
A、If the L/R rocker arms swing easily, we can test it from the following
aspects:whether the collar sheath is defective by pressuer and whether
the Rubber Sheath is worn out or cracked
B、Check whether the cotter pin is reliable.If not so ,replace it.
C 、 The main problems and homologous maintenance are as
following:check whether the spring is split or the oil will spill out in
which case the damper muse be replaced and test if the oil bowl is
excellent without damage in different circumstances.
2、Disassembly(as the following picture)
Mount fore L/R damper,up-and-down rocker arm assembly onto the
To Next Page
Loading...