EasyManua.ls Logo

Hsun hs700atv - Requirements for Torque of Fastener

Hsun hs700atv
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
98
which the grade of slope is 18% and the adhesion coefficient between tire and
road must be greater than 0.7.
m) antisway angle
。
The greatest antisway angle to the left and right at unladen or motionless must bu
greater than 25°.
n)
distance headlamp performance:
p).
The dune buggy must be equipmented with distance headlamps that
conform to GB 5948-1998 or GB 4599-94.
q). The main beam intensity of distance headlamp must reach a digree of 8000cd.
6.2 Requirements for torque of fastener
fastening parts
(N.m)torque
pillar
35~45
nut on chain stay
45~50
Upper nut on fore damper
35~45
bottom nut on fore damper
35~45
Upper nut on rear damper
45~55
bottom nut on rear damper
45~55
Nut on upper rocker arm of the left
40~50
Nut on bottom rocker arm of the
left
40~50
Nut on upper rocker arm of the
40~50