83
4.6.5.Inspection and Maintenance of rear Suspension
1.Inspection and Maintenance are similar to the fore Suspension
2.Check whether the assemble shaft of the rear damper is deformed in
which case it must bu changed.
3.Check the Collar Sheath and Rubber Sheath
4.Check if the cotter pin on the assembly shaft of the rear damper is
reliable.
Caution:
Disassemble rear damper and check if the damper and the
connecting hole is bent or cracked. In case of above defects,call
for professional staff or replace the damper and then tighten the
bolt(Note: self-lock nut is necessary and the torque must be at a
range of 45～55 N.m)
5.Electrical system
Route color indication
To Next Page
Loading...