Hsun hs700atv - 4.3 Wheel and Tire

66
circulating before riding the vehicle.
4.3 Wheel and Tire
4.3.1：Preparation for maintenance of wheel:
1.Inspect wear condition
of the tire.
(Figure 4-2-16)
2.Check if the Wheel
Hub is worn-out or
damaged. (Figure 4-2-13)
3.Check if the Wheel Hub
is rusted or cracked. Figure 4-2-16
4、Check if the conical
nuts of the Wheel Hub
Are loose or distorted.
4.3.2 Disassembly, inspection and assembly of wheel components:
4.3.2.1 Disassembly of wheel components:
Remove M10 Conical Nuts (4pcs) and detach the tire. (Figure
4-2-13)
4.3.2.2 Inspection of wheel components:
1.Check if the wheel hub has any distortion, rust, crack or other potential
defects. If so, please replace the wheel hub.