92
Starting system working process
Turn on the start switch on the left handlebar, the battery can supply
power for the CDI. Then the CDI supply power for the startor relay, then
the power from the battery can be sent to the startor motor through the
startor relay and the startor motor works help the engine to work.
Note:
1. When electrical starting, please keep the battery with enough
power and the time of pressing button will be within 55 seconds. If
longer time more than 5 seconds, it may cause the damange of
startor relay and the startor relay motor and may also cause the
damage of the battery that it can not be charged or not charge
enough.
2. When starting, if heard some noises from the startor relay, the
battery must be without enough power. Please stop starting and
change a powerful battery or charge for it.
3. If the startor motor can not work normally, please check according
to the 2 rule to see if it is not lubricated enough
To Next Page
Loading...