Phone Calls 47
Change the International Dialing Code
By default, the international dialing code is set to 011. When you’re traveling in another country,
you can set the international dialing code to your current location.
1. With two fingers, swipe down from the status bar, and then touch > Call.
2. Touch Plus code dialing > International dialing.
3. Enter the dialing code of the country where you’re located, and then touch OK.
Set Up Speed Dial
Your phone can store up to eight phone numbers in speed dial locations. (The number 1 is
reserved for Virgin Mobile voicemail access.)
To assign a speed dial number to a contact:
1. Touch > > People, and then touch a contact.
2. Touch > Set speed dial.
3. Touch Not assigned under Number to select the contact’s number that you want to
assign to the speed dial key.
4. Touch Not assigned under Location and then select a speed dial location.
5. Touch Save.
Note: If you assign a number to an already assigned speed dial location, the new phone
number will automatically replace the previous speed dial assignment.
Receive Phone Calls
When you receive a phone call from a contact, the Incoming call screen appears and displays
the caller ID icon, name, and phone number of the calling party. When you receive a phone call
from someone who is not stored in People, only the default caller ID icon and phone number
appear on the Incoming call screen.
Note: If your phone is turned off, all calls automatically go to voicemail.
Answer or Reject an Incoming Call
● If the display is on when you get a call, touch Answer or Decline.
● If the display is locked when you get a call, drag or upwards.
After declining a call, you can send a text message to the caller or create a task to remind you
to return the call. All declined calls go to your voicemail.
To Next Page
Loading...
