Logging into a public Wi-Fi network automatically (WISPr)
You can set HTC One X10 to automatically log into a public Wi-Fi network that you regularly use.
This saves you the trouble of going through the Wi-Fi provider's web authentication every time you
connect to their Wi-Fi network. Just add your login credentials to the WISPr (Wireless Internet
Service Provider roaming) settings.
The access point of the Wi-Fi network needs to support the WISPr web portal. Consult the Wi-Fi
provider for details.
1. From the Home screen, tap , and then find and tap Settings.
2. If Wi-Fi connection is off, tap the Wi-Fi On/Off switch to turn it on.
3. Tap Wi-Fi.
4. Tap Advanced.
5. Under WISPr settings, select Auto login and then tap WISPr account settings Add a new
account.
6. Enter the service provider name, your login name (the full domain name), and password.
7. Tap
Save
8. Connect to the public Wi-Fi network.
§ If you have access to several public Wi-Fi networks, you can add up to five sets of login
credentials to the WISPr accounts list.
§ In the WISPr accounts list, press and hold an account to remove or edit it.
Connecting to VPN
Add virtual private networks (VPNs) so you can connect and access resources inside a local network,
such as your corporate or home network.
Before you can connect HTC One X10 to your local network, you may be asked to:
§ Install security certificates.
§ Enter your login credentials.
§ Download and install a required VPN app, if you're connecting to a secured enterprise
network. Contact your network administrator for details.
Also, HTC One X10 must first establish a Wi-Fi or data connection before you can start a VPN
connection.
134 Internet connections
To Next Page
Loading...
Need help?
General
