Phone Calls 61
Caller ID
Caller ID identifies a caller before you answer the phone by displaying the number of the
incoming call. If you do not want your number displayed when you make a call, follow these
steps.
1. Touch > .
2. Touch .
3. Enter a phone number.
4. Touch CALL.
To permanently block your number, call Sprint Customer Service.
Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your
phone’s screen informs you that another call is coming in and displays the caller’s phone
number (if it is available and you are in digital mode).
To respond to an incoming call while you’re on a call:
■ Touch > Flash. (This puts the first caller on hold and answers the second call.)
To switch back to the first caller:
■ Touch > Flash again.
Note: For those calls where you don’t want to be interrupted, you can temporarily disable Call
Waiting by touching before placing your call. Call Waiting is automatically
reactivated once you end the call.
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when
your phone is turned off. You can continue to make calls from your phone when you have
activated Call Forwarding.
Note: Depending on your plan, you may be charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. Touch > .
2. Touch .
3. Enter the area code and phone number to which you want your calls forwarded.
To Next Page
Loading...
