24
The standard Phoenix Water Heater does not meet the required temperature settings for sanitizer booster
applications. Use only the Phoenix Sanitizer Booster that delivers temperatures of 184
o
F. Inlet water to
the booster must be supplied at 140
o
PHOENIX SANITIZER BOOSTER INSTALLATION
p/n PH130-55SA / PH199-55SA
Figure 10 LP-179-SA - NOTE: In Massachusetts, you must install a vacuum relief valve per 248 CMR. For
further energy savings, install the Phoenix Sanitizer Booster on the same electrical circuit as the dishwasher.
To Next Page
Loading...
