4
FOR THE INSTALLER
This appliance must be installed by qualified and licensed personnel. The installer should be guided by
the instructions furnished with the boiler, and with local codes and utility company requirements. In the
absence of local codes, preference should be given to the National Fuel Gas Code, ANSI Z223.1-2002.
INSTALLATIONS MUST COMPLY WITH:
Local, state, provincial, and national codes, laws, regulations and ordinances.
The latest version of the National Fuel Gas Code, ANSI Z223.1, from American Gas Association
Laboratories, 8501 East Pleasant Valley Road, Cleveland, OH 44131.
In Canada – CGA No. B149 (latest version), from Canadian Gas Association Laboratories, 55 Scarsdale
Road, Don Mills, Ontario, Canada M3B 2R3. Also, Canadian Electrical Code C 22.1, from Canadian
Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6.
Code for the installation of Heat Producing Appliances (latest version), from American Insurance
Association, 85 John Street, New York, NY 11038.
The latest version of the National Electrical Code, NFPA No. 70.
NOTE: The gas manifold and controls met safe lighting and other performance criteria when undergoing
tests specified in ANSI Z21.10.3 – latest edition.
This manual must only be used by a qualified heating installer/service technician. Read all instructions in
this manual before installing. Perform steps in the order given. Failure to comply could result in severe
personal injury, death or substantial property damage.
To Next Page
Loading...
