AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 2-4 Removing an AP
If a captive screw is installed, remove the screw and then follow the preceding steps to uninstall the
AP.
An AP is secured to the mounting bracket using a self-locking mechanism. Therefore, before
installing an enclosure for an AP, remove all screws. Remove the AP and mounting bracket together
from the ceiling, and then remove the AP from the mounting bracket.
2.7 Cable Connection
Table 2-4 describes the cable connections.
Table 2-3 Appearance of the AP
To Next Page
Loading...
