Huawei AR530 Series - Page 123

Figure 3-22 Networking diagram of VLAN damping configuration
Router
Eth2/0/0 Eth2/0/1
VLANIF10
10.100.100.100/24
10.100.100.111/24 10.100.100.110/24
VLAN 10
IP
network
Configuration Roadmap
The configuration roadmap is as follows:
1. Create a VLAN.
2. Add interfaces to the VLAN.
3. Create a VLANIF interface and set the IP address of the VLANIF interface.
4. Set the VLAN damping delay.
Procedure
Step 1 Create a VLAN.
# Create VLAN 10.
<Huawei> system-view
[Huawei] sysname Router
[Router] vlan batch 10
Step 2 Add interfaces to the VLAN.
# Add Ethernet 2/0/0 to VLAN 10.
[Router] interface ethernet 2/0/0
[Router-Ethernet2/0/0] port link-type access
[Router-Ethernet2/0/0] port default vlan 10
[Router-Ethernet2/0/0] quit
# Add Ethernet 2/0/1 to VLAN 10.
[Router] interface ethernet 2/0/1
[Router-Ethernet2/0/1] port link-type access
[Router-Ethernet2/0/1] port default vlan 10
[Router-Ethernet2/0/1] quit
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
3 VLAN Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109