Huawei AR530 Series - Example for Configuring Communication Across a Layer 3 Network Using VLANIF Interfaces

Configuration Files
Configuration file of the Router
#
vlan batch 2 to 4
#
vlan 4
aggregate-vlan
access-vlan 2 to 3
#
interface Vlanif4
ip address 10.1.1.1 255.255.255.0
arp-proxy inter-sub-vlan-proxy enable
#
interface Ethernet2/0/1
port link-type access
port default vlan 2
#
interface Ethernet2/0/2
port link-type access
port default vlan 2
#
interface Ethernet2/0/3
port link-type access
port default vlan 3
#
interface Ethernet2/0/4
port link-type access
port default vlan 3
#
return
3.7.5 Example for Configuring Communication Across a Layer 3
Network Using VLANIF Interfaces
Networking Requirements
As shown in Figure 3-24, RouterA and RouterB connect to Layer 2 networks on VLAN 10.
RouterA and RouterB communicate with each other through an OSPF-enabled Layer 3 network.
Computers on the two Layer 2 networks need to be isolated at Layer 2 and communicate at Layer
3.
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching 3 VLAN Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
113