6 STP/RSTP Configuration
About This Chapter
This chapter describes the concepts and configuration procedures for the Spanning Tree Protocol
(STP) and Rapid Spanning Tree Protocol (RSTP), and provides configuration examples.
6.1 Introduction to STP/RSTP
This section describes definition and purpose of STP/RSTP.
6.2 Principles
This section describes how STP/RSTP works.
6.3 Application
This section describes the typical application of STP/RSTP.
6.4 Configuration Task Summary
This section describes the STP/RSTP configuration tasks and configuration logic.
6.5 Default Configuration
This section provides the default STP/RSTP configuration. You can change the configuration
based on your needs.
6.6 Configuring STP/RSTP
This section describes how to configure STP/RSTP.
6.7 Maintaining STP/RSTP
This section describes how to view and reset STP/RSTP statistics.
6.8 Configuration Examples
This section provides several STP/RSTP configuration examples.
6.9 References
This section provides references for STP/RSTP.
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
6 STP/RSTP Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
161
To Next Page
Loading...
