EasyManua.ls Logo

Huawei AR530 Series - Page 172

Huawei AR530 Series
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Configure GVRP on all switche devices of company B and set the registration mode to
fixed for the interfaces connecting to company A to allow only the VLAN to which
company B belongs to pass.
Procedure
Step 1 Create VLAN 101 to VLAN 200 on RouterA.
<RouterA> system-view
[RouterA] vlan batch 101 to 200
Step 2 Configure GVRP on Router A.
# Enable GVRP globally.
[RouterA] gvrp
# Set the link type of Eth 2/0/1 and Eth 2/0/2 to trunk, and configure the interfaces to allow all
VLANs to pass through.
[RouterA] interface ethernet 2/0/1
[RouterA-Ethernet2/0/1] port link-type trunk
[RouterA-Ethernet2/0/1] port trunk allow-pass vlan all
[RouterA-Ethernet2/0/1] quit
[RouterA] interface ethernet 2/0/2
[RouterA-Ethernet2/0/2] port link-type trunk
[RouterA-Ethernet2/0/2] port trunk allow-pass vlan all
[RouterA-Ethernet2/0/2] quit
# Enable GVRP on the interfaces and set the registration modes for the interfaces.
[RouterA] interface ethernet 2/0/1
[RouterA-Ethernet2/0/1] gvrp
[RouterA-Ethernet2/0/1] gvrp registration normal
[RouterA-Ethernet2/0/1] quit
[RouterA] interface ethernet 2/0/2
[RouterA-Ethernet2/0/2] gvrp
[RouterA-Ethernet2/0/2] gvrp registration normal
[RouterA-Ethernet2/0/2] quit
The configuration of RouterB is similar to that of RouterA.
Step 3 Configure RouterC.
# Create VLAN 101 to VLAN 200.
<RouterC> system-view
[RouterC] vlan batch 101 to 200
# Enable GVRP globally.
[RouterC] gvrp
# Set the link type of Eth 2/0/1 and Eth 2/0/2 to trunk, and configure the interfaces to allow all
VLANs to pass through.
[RouterC] interface ethernet 2/0/1
[RouterC-Ethernet2/0/1] port link-type trunk
[RouterC-Ethernet2/0/1] port trunk allow-pass vlan all
[RouterC-Ethernet2/0/1] quit
[RouterC] interface ethernet 2/0/2
[RouterC-Ethernet2/0/2] port link-type trunk
[RouterC-Ethernet2/0/2] port trunk allow-pass vlan all
[RouterC-Ethernet2/0/2] quit
# Enable GVRP on the interfaces and set the registration modes for the interfaces.
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
5 GVRP Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
158

Table of Contents

Other manuals for Huawei AR530 Series

Related product manuals