EasyManua.ls Logo

Huawei AR530 Series - Page 329

Huawei AR530 Series
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Set the highest priority for GE7/0/2 of Router3 and retain the default priority of the
other interfaces so that GE7/0/2 of Router3 will be blocked.
e. Configure delayed preemption on the device where the primary edge interface is
located.
2. Configure the Layer 2 forwarding function on CE1 and Router1 to Router5.
Procedure
Step 1 Configure basic SEP functions.
1. Configure SEP segment 1 on Router1 to Router5 and configure VLAN 10 as the control
VLAN of SEP segment 1.
# Configure Router1.
<Huawei> system-view
[Huawei] sysname Router1
[Router1] sep segment 1
[Router1-sep-segment1] control-vlan 10
[Router1-sep-segment1] protected-instance all
[Router1-sep-segment1] quit
# Configure Router2.
<Huawei> system-view
[Huawei] sysname Router2
[Router2] sep segment 1
[Router2-sep-segment1] control-vlan 10
[Router2-sep-segment1] protected-instance all
[Router2-sep-segment1] quit
# Configure Router3.
<Huawei> system-view
[Huawei] sysname Router3
[Router3] sep segment 1
[Router3-sep-segment1] control-vlan 10
[Router3-sep-segment1] protected-instance all
[Router3-sep-segment1] quit
# Configure Router4.
<Huawei> system-view
[Huawei] sysname Router4
[Router4] sep segment 1
[Router4-sep-segment1] control-vlan 10
[Router4-sep-segment1] protected-instance all
[Router4-sep-segment1] quit
# Configure Router5.
<Huawei> system-view
[Huawei] sysname Router5
[Router5] sep segment 1
[Router5-sep-segment1] control-vlan 10
[Router5-sep-segment1] protected-instance all
[Router5-sep-segment1] quit
NOTE
l The control VLAN must be a VLAN that has not been created or used, but the configuration file
automatically displays the command for creating the VLAN.
l Each SEP segment must be configured with a control VLAN. After an interface is added to the
SEP segment configured with a control VLAN, the interface is automatically added to the control
VLAN.
2. Add all devices on the ring to SEP segment 1 and configure interface roles on the devices.
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
8 SEP Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
315

Table of Contents

Other manuals for Huawei AR530 Series

Related product manuals