Configuration Procedure
1. Configure RouterA.
# Create bridge group 1.
<Huawei> system-view
[Huawei] sysname RouterA
[RouterA] bridge 1
[RouterA-bridge1] quit
# Add Eth2/0/2 and Eth2/0/1 to VLAN 11 to allow the communication between User 1 and
User 2.
[RouterA] vlan 11
[RouterA-vlan11] quit
[RouterA] interface ethernet 2/0/2
[RouterA-Ethernet2/0/2] port link-type access
[RouterA-Ethernet2/0/2] port default vlan 11
[RouterA-Ethernet2/0/2] quit
[RouterA] interface ethernet 2/0/1
[RouterA-Ethernet2/0/1] port link-type access
[RouterA-Ethernet2/0/1] port default vlan 11
[RouterA-Ethernet2/0/1] quit
#Add VLANIF 11 to bridge group 1.
[RouterA] interface vlanif 11
[RouterA-Vlanif11] bridge 1
[RouterA-Vlanif11] quit
# Add Serial3/0/0 to bridge group 1.
[RouterA] interface serial 3/0/0
[RouterA-Serial3/0/0] link-protocol ppp
[RouterA-Serial3/0/0] bridge 1
[RouterA-Serial3/0/0] quit
2. Configure RouterB.
# Create bridge group 1.
<Huawei> system-view
[Huawei] sysname RouterB
[RouterB] bridge 1
[RouterB-bridge1] quit
# Add Eth2/0/2 and Eth2/0/1 to VLAN 11 to allow the communication between User 3 and
User 4.
[RouterB] vlan 11
[RouterB-vlan11] quit
[RouterB] interface ethernet 2/0/2
[RouterB-Ethernet2/0/2] port link-type access
[RouterB-Ethernet2/0/2] port default vlan 11
[RouterB-Ethernet2/0/2] quit
[RouterB] interface ethernet 2/0/1
[RouterB-Ethernet2/0/1] port link-type access
[RouterB-Ethernet2/0/1] port default vlan 11
[RouterB-Ethernet2/0/1] quit
#Add VLANIF 11 to bridge group 1.
[RouterB] interface vlanif 11
[RouterB-Vlanif11] bridge 1
[RouterB-Vlanif11] quit
# Add Serial3/0/0 to bridge group 1.
[RouterB] interface serial 3/0/0
[RouterB-Serial3/0/0] link-protocol ppp
[RouterB-Serial3/0/0] bridge 1
[RouterB-Serial3/0/0] quit
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
9 Transparent Bridging Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
386
To Next Page
Loading...
