EasyManua.ls Logo

Huawei AR530 Series - Page 406

Huawei AR530 Series
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Configure interfaces to allow the packets from VLAN 11 and VLAN 12 to pass
through.
l On Router A and Router B:
1. Configure bridge groups.
2. Add WAN interfaces Ethernet1/0/0 and Ethernet2/0/0 to the same bridge group.
3. Enable VLAN ID transparent transmission on user-side interfaces and network-side
interfaces to allow users in the same VLAN to communicate with each other and
isolate users in different VLANs.
Configuration Procedure
1. Configure Router A.
# Create bridge group 1.
<Huawei> system-view
[Huawei] sysname RouterA
[RouterA-bridge1] bridge 1
[RouterA-bridge1] undo shutdown
[RouterA-bridge1] quit
# Add Ethernet1/0/0 and Ethernet2/0/0 to bridge group 1, and enable VLAN ID transparent
transmission on the two interfaces.
[RouterA] interface ethernet 1/0/0
[RouterA-Ethernet1/0/0] bridge 1
[RouterA-Ethernet1/0/0] bridge vlan-transmit enable
[RouterA-Ethernet1/0/0] quit
[RouterA] interface ethernet 2/0/0
[RouterA-Ethernet2/0/0] bridge 1
[RouterA-Ethernet2/0/0] bridge vlan-transmit enable
[RouterA-Ethernet2/0/0] quit
2. Configure Switch 1.
# Create VLANs.
<Huawei> system-view
[Huawei] sysname Switch1
[Switch1] vlan 11
[Switch1-vlan11] quit
[Switch1] vlan 12
[Switch1-vlan12] quit
# Add Ethernet1/0/1 to VLAN 11 and Ethernet1/0/2 to VLAN 12.
[Switch1] interface ethernet 1/0/1
[Switch1-Ethernet1/0/1] port link-type access
[Switch1-Ethernet1/0/1] port default vlan 11
[Switch1-Ethernet1/0/1] quit
[Switch1] interface ethernet 1/0/2
[Switch1-Ethernet1/0/2] port link-type access
[Switch1-Ethernet1/0/2] port default vlan 12
[Switch1-Ethernet1/0/2] quit
# Configure Ethernet 1/0/3 to allow the packets from VLAN 11 and VLAN 12 to pass
through.
[Switch1] interface ethernet 1/0/3
[Switch1-Ethernet1/0/3] port link-type trunk
[Switch1-Ethernet1/0/3] port trunk allow-pass vlan 11 to 12
[Switch1-Ethernet1/0/3] quit
3. Configure Router B.
# Create bridge group 2.
<Huawei> system-view
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
9 Transparent Bridging Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
392

Table of Contents

Other manuals for Huawei AR530 Series

Related product manuals