Huawei BBU3900 - E1;T1 Surge Protection Transfer Cable; Table 4-6 Pin Assignment for the Wires of the 120-Ohm E1 Twisted Pair Cable

To Next Page

To Previous Page

Table 4-6 Pin assignment for the wires of the 120-ohm E1 twisted pair cable

Pins of the DB26

Male Connector

Wire Color Wire Type Cable Labels

X.1 Blue Twisted pair RX1+

X.2 White RX1-

X.3 Orange Twisted pair RX2+

X.4 White RX2-

X.5 Green Twisted pair RX3+

X.6 White RX3-

X.7 Brown Twisted pair RX4+

X.8 White RX4-

X.19 Gray Twisted pair TX1+

X.20 White TX1-

X.21 Blue Twisted pair TX2+

X.22 Red TX2-

X.23 Orange Twisted pair TX3+

X.24 Red TX3-

X.25 Green Twisted pair TX4+

X.26 Red TX4-

4.6 E1/T1 Surge Protection Transfer Cable

This section describes the E1/T1 surge protection transfer cable connecting the UELP to the

transmission board. This cable is optional.

Exterior

The E1/T1 surge protection transfer cable has a DB26 male connector at one end and a DB25

male connector at the other end, as shown in Figure 4-7.

4 BBU3900 Cables

BBU3900

Hardware Description

4-10 Huawei Proprietary and Confidential

Issue 11 (2010-11-10)

Other manuals for Huawei BBU3900