Huawei Copy-SUN2000 L1 Series - 5 Electrical Connection

5 Electrical Connection
Precautions
D ANGER
Before connecting cables, ensure that the DC switch on the SUN2000 and all the
switches connecting to the SUN2000 are set to OFF position. Otherwise, the high
voltage of the SUN2000 may result in electric shocks.
WARNING
● The device damage caused by incorrect cable connections is not covered under
any warranty.
● Only certied electricians are allowed to connect cables.
● Operation personnel must wear proper PPE when connecting cables.
NO TE
The cable colors shown in the electrical connection diagrams provided in this chapter are
for reference only. Select cables in accordance with local cable specications (green-and-
yellow cables are only used for PE).
Copy-SUN2000-(2KTL-6KTL)-L1
User Manual 5 Electrical Connection
Issue 06 (2022-03-10) Copyright © Huawei Technologies Co., Ltd. 30