Need help?Do you have a question about the Huawei SUN2000 L1 Series and is the answer not in the manual?
General| Max. Efficiency | 98.6% |
|---|---|
| Number of MPP Trackers | 2 |
| Output Frequency | 50 Hz / 60 Hz |
| Protection Class | IP65 |
| Cooling | Natural Convection |
| Type | String Inverter |
| Output Voltage | 230 V |
| Adjustable Power Factor Range | 0.8 leading - 0.8 lagging |
| Total Harmonic Distortion (THD) | ≤ 3% |
| DC Injection Current | <0.5% of rated output current |
| Operating Temperature Range | -25 °C ~ +60 °C |
| Relative Humidity (Operating) | 0% - 100% (non-condensing) |
| Communication | RS485 |
Overview of physical components, connection ports, and ground point.
Explanation of LED indicators for system status.
Specifies space, angle, and mounting dimensions for installation.
Step-by-step guide to physically install the inverter.
Details cable types, cross-sectional areas, and outer diameters.
Instructions for connecting the protective earthing cable.
Guide for installing wireless communication modules like WLAN and Smart Dongles.
Steps to connect the AC power output cable to the inverter.
Detailed instructions for connecting DC input power cables safely and correctly.
Guide for connecting battery cables to the inverter, with safety precautions.
Instructions for connecting signal cables to the inverter's COM port.
Defines the pin assignments for the COM port used for signal connections.
Instructions for downloading the mobile application for managing the inverter.
Steps to create an installer account for the management system.
Guide to setting up a PV plant and its owner account in the system.
Steps for configuring the physical layout of PV optimizers via app and web.
Answers to frequently asked questions regarding device commissioning procedures.
Procedure to safely reset the inverter's password for access recovery.
To Next Page