Figure 5-2 Crimping an OT terminal
(A) Core wire (B) Insulation layer (C) Heat shrink tubing
(D) Hydraulic pliers (E) Heat gun
Step 2 Connect the PE cable.
● Ensure that the PE cable is connected securely.
● You are advised to use the right ground point and reserve the other ground
point for future use.
Copy-SUN2000-(2KTL-6KTL)-L1
User Manual 5 Electrical Connection
Issue 06 (2022-03-10) Copyright © Huawei Technologies Co., Ltd. 37
To Next Page
Loading...
