NOTE
You can query or configure the MM910 floating IP address in any of the following ways:
l Use the chassis intelligent display. For details, see E9000 Chassis Intelligent Display V100R001
Parameter Reference.
l Use the HMM WebUI. For details, see Configuring the MM910 IP Addresses in MM910
Management Module V100R001 User Guide.
l Run the floatip command on the MM910 CLI. For details, see MM910 Management Module
V100R001 Command Reference.
The message "There is a problem with this website's security certificate" is displayed.
Step 8 (Optional) Add the MM910 IP address to the Trusted sites zone.
By default, Internet Explorer enhanced security configuration is enabled on the Windows
Server series OSs. Add the MM910 IP address to the trusted sites zone as follows:
1. On Internet Explorer, choose Tools > Internet Options.
The Internet Options dialog box is displayed.
2. Click the Security tab.
3. Click Trusted sites, and click Sites.
4. In the Trusted sites dialog box, click Add to add the MM910 IP address to the trusted
site list, and click Close.
5. Refresh the page.
6. In the status bar of a browser, check whether the MM910 IP address is in the Trusted
sites zone.
Step 9 Click Continue to this website (not recommended).
The HMM Web login page is displayed, as shown in Figure 6-8.
Figure 6-8 Logging in to HMM Web of version V603
NOTE
The login page varies slightly with the HMM software version.
Step 10 Set the login parameters.
l Language: Select the language to be used.
l User name: Enter the user name. The default user name is root.
l Password: Enter the password. The default password is Huawei12#$.
If User must change password at next login is selected when users are created on the
LDAP server, logins will fail. Deselect this option on the LDAP server.
l Log in to: Select This Machine/computer for a local user. If the system manages
domain users over Active Directory (AD), select LDAP.
CX320 Switch Module
User Guide
6 Common Operations
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 96