2. Push the optical module into the optical port until the optical module is locked in place,
as shown in Figure 3-9.
Figure 3-9 Installing an optical module
3. Remove the dust-proof cap from the optical fiber. See (1) in Figure 3-10.
Figure 3-10 Connecting an optical fiber
4. Insert the optical fiber into the optical module. See (2) in Figure 3-10.
Step 10 Connect a 40GE optical module and optical fiber.
1. Determine the optical module type and the optical port to be connected depending on site
requirements.
2. Remove dust-proof caps from the optical module and optical fiber, as shown in Figure
3-11.
Figure 3-11 Removing dust-proof caps
CX320 Switch Module
User Guide
3 Installing and Removing the CX320
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 42
To Next Page
Loading...
