Huawei eA660 Series - What Do I Do When the Data Service Is Not Provided; Opening the Web UI Function of the Internet Explorer Is Abnormal

eA660 Series CPE
User Guide
6 FAQ
Issue 06 (2019-04-03)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
The PoE is powered by the CPE using item 02220015 as the power adapter.

The minimum input voltage: 90 V

The maximum input voltage: 264 V

Rate output voltage or current: 54 V or 650 mA

Output voltage accuracy: 5%

Input or output cable connector: AC 2pin or RJ45 8pin
----End
6.3 What Do I Do When the Data Service Is not Provided?
Problem Description:
Data service is not provided
Solution:
Step 1 Check whether the CPE is powered. If the Power indicator presents red light, the power
supply is provided.
Step 2 Check whether the SIM card is correctly installed.
Step 3 Confirm whether the CPE is connected to the network. Check whether the RSSI indicator is
steady or blinking.
Step 4 If the problem persists, contact local service provider.
----End
6.4 Opening the Web UI Function of the Internet Explorer
Is Abnormal
Problem Description:
The function display is incomplete or only a small amount of information is displayed.
Solution:
Step 1 Click Settings in the upper right corner of the browser to open the Compatibility View
Settings dialog box.
Step 2 Add the CPE login address (Default: 192.168.1.1).
Step 3 Click Add to close the window.