Huawei FusionServer Pro 2288X V5 - Page 23

1 LOM ports 2 Ports for OCP 2.0
mezzanine card 1
3 VGA port 4 USB 3.0 ports
5 Management network
port
6 Ports for OCP 2.0
mezzanine card 2
7 Serial port 8 Socket for PSU 1
9 Socket for PSU 2 - -
Port Description
Table 2-4 Ports on the rear panel
Port Type Quantity Description
LOM port 10GE optical
port
2 For details, see 2.6.1 LOMs.
OCP 2.0
mezzanine
card port
- - For details, see 2.6.2 OCP 2.0
Mezzanine Cards.
VGA port DB15 1 Used to connect a display
terminal, such as a monitor or
KVM.
USB port USB 3.0 2 Used to connect to a USB
device.
NOTICE
Before connecting an external
USB device, check that the USB
device functions properly. The
server may operate abnormally if
an abnormal USB device is
connected.
Management
network port
1000BASE-T 1 Used for server management.
NOTE
The management network port is
a GE port that supports 100
Mbit/s and 1000 Mbit/s auto-
negotiation.
FusionServer Pro 2288X V5 Server
User Guide 2 Hardware Description
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 15