Huawei FusionServer Pro 2288X V5 - Indicators

2.2.2 Indicators
Indicator Positions
Figure 2-14 Indicators on the rear panel
1 LOM indicators 2 OCP 2.0 mezzanine card
indicators
3 Data transmission status
indicator of the
management network
port
4 Connection status
indicator for the
management network
port
5 UID indicator 6 Serial port indicators
NOTE
The indicators are reserved.
7 PSU indicator - -
Indicator Description
Table 2-3 Indicators on the rear panel
Indicator
Description
LOM indicators For details, see 2.6.1 LOMs.
OCP 2.0 mezzanine
card indicators
For details, see 2.6.2 OCP 2.0 Mezzanine Cards.
Data transmission
status indicator of the
management network
port
● O: No data is being transmitted.
● Blinking yellow: Data is being transmitted.
Connection status
indicator for the
management network
port
● O: The network port is not connected.
● Steady green: The network port is properly
connected.
FusionServer Pro 2288X V5 Server
User Guide 2 Hardware Description
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 13