Huawei FusionServer Pro 2288X V5 - Initial Configuration Overview; 7.4.2 Configuration Overview

7.4.2 Conguration Overview
Conguration Process
Figure 7-25 Initial
conguration process
Table 7-5 Process description
Step
Description
Change the initial
passwords.
● Initial password of the default iBMC user
● Initial iBMC U-Boot password
Check the server. ● Ensure that the server version meets site
requirements.
● Ensure that no alarm is generated for the server.
Set the iBMC IP
address.
Set an iBMC IP address for the server.
Congure RAID
settings.
Congure the RAID array based on service requirements.
Congure BIOS
settings.
Congure the BIOS settings of the server, including the
boot mode, NIC PXE function, and BIOS password.
Install the OS. Install an OS for the server.
FusionServer Pro 2288X V5 Server
User Guide 7 Installation and Conguration
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 98