Huawei FusionServer Pro 2288X V5 - Logging into CLI; 9.4.1 Logging In to the CLI Using PuTTY over a Network Port

Step 6 Select Intel(R) VMD Cong and press Enter.
Step 7 Select Disabled and press Enter.
Step 8 Press F10.
The Save Changes&Exit dialog box is displayed.
Step 9 Select Yes and press Enter.
The server automatically restarts for the settings to take
eect.
----End
9.6 Accessing the BIOS
9.6.1 Accessing the BIOS (V6XX or Later)
Procedure
Step 1 Log in to the desktop of the server.
For details, see 9.3 Logging In to the Desktop of a Server.
Step 2 On the Remote Virtual Console, click on the menu bar.
Step 3 Select Reset or Forced System Reset.
"Are you sure to perform this operation?" is displayed.
Step 4 Click Yes.
The server is restarted.
Step 5 During the restart process, press Delete or F4 when the information shown in
Figure 9-16 is displayed.
FusionServer Pro 2288X V5 Server
User Guide 9 Common Operations
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 133