4-1
4 Configuration of WLAN Parameters
If your computer has a wireless network adapter, you can use it to access the wireless
network set up by the router.
The method for installing the wireless adapter and its driver varies by vendor. For details,
see the installation guide provided by the vendor of your wireless adapter.
4.1 Setting Up a Wireless Connection Manually
To manually set up a wireless connection, use either of the following methods:
Use the tool provided by your network adapter.
For details, see the user guide of your network adapter.
Use the wireless configuration software provided by the operating system of your
computer.
This section takes Windows XP and Windows 7 as an example and describes how to set
up a wireless connection between your computer and the router manually.
4.1.1 Procedure on Computers Running Windows 7
Step 1
Choose
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing
Center
>
Change adapter settings
. Right-click
Local Area Connection
, and choose
Connect/Disconnect
.
To Next Page
Loading...
Need help?
General
