Huawei LUNA2000-100KTL-M1 - Typical Application Scenario

Working
Mode
Description
Operating In operating mode:
● The Smart PCS controls charge and discharge based on system
commands.
● The Smart PCS enters Shutdown mode after detecting a fault or
receiving a shutdown command.
Shutdown ● In Standby or Operating mode, the Smart PCS enters Shutdown
mode after detecting a fault or receiving a shutdown command.
● In Shutdown mode, the Smart PCS enters Standby mode when
a startup command is received and faults are rectied, the DC
power is insucient, or the DC external switch is turned o.
2.5 Typical Application Scenario
Figure 2-8 Electrical connection diagram (components in the dotted box are
optional)
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 2 Product Overview
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 19