Huawei LUNA2000-100KTL-M1 - Setting Feature Parameters

6.5.3 Setting Feature Parameters
Procedure
Step 1 Choose Settings > Feature parameters to set feature parameters.
----End
Parameters
No. Category Parameter Description Remarks
1 Communication
failure settings
Communication
disconnection
fail-safe
If this parameter is set to
Enable, the device performs
protection according to the
set power when
communication between the
device and the SmartLogger
is interrupted for a period
longer than Communication
disconnection detection
time.
-
2 Communication
disconnection
detection time
(s)
Species the fail-safe
detection time for
disconnection between the
device and the SmartLogger
or Smart Dongle.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable.
3 Active power
mode when
communication
fails
Species the protection
threshold of the active power
after communication is
interrupted. The value can be
a percentage or a xed value.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable.
4 Active power
threshold when
communication
fails (%)
Species the active power
threshold in percentage.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable and Active
power threshold
when
communication
fails is set to a
percentage.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 6 Power-On Commissioning
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 59