----End
5.8 Connecting FE Communications Cables
● The Smart PCS is connected to the SmartModule through FE communications
cables. Ensure that the FE ports on the two ends are connected to GE2 and GE3
of the SmartModule.
● For multiple Smart PCSs, connect all Smart PCSs in hand-in-hand mode
through FE communications cables into a ring network.
● The FE communications cable delivered with the Smart PCS is 1.2 m long. Use
the original cable if possible.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 5 Electrical Connections
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 43
To Next Page
Loading...