Figure 5-5 Removing accessories from the AC maintenance compartment
(1) Spare screws on the door panel of
the maintenance compartment
(2) Crimping module
----End
5.5 Replacing the Crimping Module
Procedure
● Before connecting DC power cables, replace the crimping module. To connect a multi-
core AC power cable, replace the crimping module in the same way as on the DC side.
● If the crimping module does not need to be replaced, remove it and keep it properly.
Step 1 Replace the crimping module.
Figure 5-6 Replacing the crimping module (on the DC side)
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 5 Electrical Connections
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 38
To Next Page
Loading...