Huawei LUNA2000-100KTL-M1 - Closing Maintenance Compartment Doors; Closing the DC Maintenance Compartment Door

Figure 5-19 Connecting FE communications cables
(1) White-and-
orange
(2) Orange (3) White-and-
green
(4) Blue
(5) White-and-blue (6) Green (7) White-and-
brown
(8) Brown
----End
5.9 Closing Maintenance Compartment Doors
NO TICE
● Before closing a maintenance compartment door, check that the cables are
connected correctly and securely, close the terminal block cover, and remove
any dirt or other unnecessary items from the maintenance compartment.
● If a maintenance compartment door screw becomes lost, obtain a spare screw
from the accessory bag in the maintenance compartment.
5.9.1 Closing the DC Maintenance Compartment Door
Step 1 Adjust the support bar, close the maintenance compartment door, and tighten the
two screws on the door.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 5 Electrical Connections
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 46