(1) Shielded plug (2) Plastic housing (3) Coupling nut
(4) Seal ring (5) Sealing nut NA
Step 3 Line up the exposed wires of the network cable in sequence and connect them to
the corresponding pins in the plug.
Figure 5-15 Connecting the plug
Step 4 Crimp the plug using a crimping tool.
Step 5 Secure the plastic housing to the plug.
Figure 5-16 Connecting the plastic housing
Step 6 Insert the seal ring into the plastic housing and secure the coupling nut to the
plastic housing.
Figure 5-17 Connecting the seal ring and coupling nut
Step 7 Secure the sealing nut to the plastic housing.
Figure 5-18 Connecting the sealing nut
Ensure that the sealing nut is secured.
Step 8 Insert the plug into the FE port on the Smart PCS and tighten the coupling nut.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 5 Electrical Connections
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 45
To Next Page
Loading...