Huawei LUNA2000-100KTL-M1 - Powering on the Smart PCS; Downloading the App

6.2 Powering On the Smart PCS
Precautions
D ANGER
● Wear insulated gloves and use insulated tools to prevent electric shocks or
short circuits.
NO TICE
● Before turning on the AC switch between the Smart PCS and the power grid,
check whether the AC voltage is within the required range using a multimeter.
(See the local power grid standard.)
● Before the equipment is put into operation for the rst time, ensure that the
parameters are set correctly by professional personnel. Incorrect parameter
settings may result in noncompliance with local grid connection requirements
and
aect the normal operations of the equipment.
● If the Smart PCS has not been used for six months or longer after being
installed, it must be checked and tested by professionals before operation.
Procedure
Step 1 Turn on the AC switch between the AC side of the Smart PCS and the power grid.
Step 2 Turn on the DC switches between the DC side of the Smart PCS and the ESS.
Step 3 Deliver a startup command on the SUN2000 app, SmartLogger, or the
management system, and wait for the system soft start.
NO TE
Before sending a startup command to the Smart PCS, ensure that the DC voltage is within
the normal range.
Step 4 Observe the LED indicators to check the running status of the Smart PCS.
----End
6.3 Downloading the App
Functions
The SUN2000 app (also referred to as the app) is a convenient local maintenance
platform that connects to the Smart PCS through the WLAN and allows users to
query alarms, congure parameters, and perform routine maintenance.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 6 Power-On Commissioning
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 51