Huawei LUNA2000-100KTL-M1 - Page 66

No. Category Parameter Description Remarks
5 Active power
threshold when
communication
fails (kW)
Species the active power
threshold as a xed value.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable and Active
power threshold
when
communication
fails is set to a
xed
value.
6 Reactive power
mode when
communication
fails
Species the protection
threshold of the reactive
power after communication is
interrupted, including Q/S
and power factor.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable.
7 Reactive power
threshold when
communication
fails (%)
Species the Q/S threshold of
the reactive power (%)
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable and
Reactive power
threshold when
communication
fails is set to Q/S.
8 Reactive power
threshold when
communication
fails
Species the power factor
threshold of the reactive
power (PF)
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable and
Reactive power
threshold when
communication
fails is set to Power
factor.
9 Soft start time Soft start time
(s)
Species the duration
required for gradual power
increase when the device
starts.
-
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 6 Power-On Commissioning
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 60