Step 8 Push in the fan tray until the fan bae plate is ush with the Smart PCS.
Figure 7-15 Pushing in the fan tray
Step 9 Connect the cables correctly according to the cable labels, and then bind the
cables.
Figure 7-16 Binding the cables
Step 10 Push the fan tray into the slot and tighten the screws.
Figure 7-17 Reinstalling the fan tray
----End
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 7 Device Maintenance
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 79
To Next Page
Loading...