Figure 1-3 SmartLogger+ESS FE star+PCS FE star topology (the device in the
dotted box is optional)
Typical Scenario 2: SACU+ESS FE Star+PCS FE Ring Topology
In this scenario, the SmartLogger3000A and SmartModule are congured, and the
customer needs to prepare at least one switch (10M/100M). The quantities of
switches and Ethernet ports are congured based on the quantities of ESSs and
PCSs connected to the array. In the PCS FE ring topology, a single FE ring network
supports a maximum of 15 PCSs.
Commercial and Industrial Microgrid Energy Storage
Solution
Quick Guide (With Third-Party Microgrid Central
Controller) 1 Solution Introduction
Issue 04 (2023-12-18) Copyright © Huawei Digital Power Technologies Co., Ltd. 10
To Next Page
Loading...
