Huawei OptiX OSN 8800 User Manual

OptiX OSN 8800/6800/3800
Hardware Description
4 OptiX OSN 8800 Subrack
Issue 01 (2016-03-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
Boar
d
Front Panel
Interface
Specification
Name
Conne
ctor
Type
Pino
ut
Description
(W): 5 W
Maximum
power
consumption
(W)
b
: 7 W
TN5
1AT
E
ATE
ALMI1
ALMO1 ALMO2
ALMI2
ALMO3
ALMO4
ALMO
1-ALM
O4:
housek
eeping
alarm
output
interfac
es
RJ45
Table
4-6
Table
4-7

Alarm outputs are sent to
the DC power
distribution cabinet
through the output
interface and the
cascading interface. You
can configure it to be the
other outputs to
implement integrated
display of alarms. The
alarm outputs are
controlled by the internal
relay contact. When the
relay contact is closed,
the resistance of each
ALMO interface is less
than 1 ohm. When the
relay contact is open, the
resistance of each
ALMO interface is an
infinite number.

The ALMO1 and
ALMO2 interfaces have
the same pin usage and
are a pair of
housekeeping alarm
output/cascading
interfaces. Similarly, the
ALMO3 and ALMO4
interfaces also have the
same pin usage and are
another pair of
housekeeping
output/cascading
interfaces. For example,
when ALMO1 and
ALMO3 are used to
output housekeeping
alarm signals, ALMO2
and ALMO4 can be
cascaded to ALMO2 and
ALM04 on another
subrack.

Dimensions
of front panel
(H x W x D):
80 mm (3.1
in.) x 50.8
mm (2.0 in.)
x 220 mm
(8.7 in.)

Weight: 0.2
kg (0.44 lb.)

Power
consumption:
Typical
power
consumption
(W): 0.3 W
Maximum
power
consumption
(W)
b
: 0.3 W

Huawei OptiX OSN 8800 Specifications

General

Brand	Huawei
Model	OptiX OSN 8800
Category	Network Hardware
Language	English